APR-2000/APR-2000P User’s Manual
- 31 -
DMZ
Enable or disable the DMZ.
Description
Description for the DMZ host entry.
DMZ Host IP
Enter the IP address of the computer to be in the DMZ.
4. UPnP
The UPnP (Universal Plug and Play) feature allows the devices, such as Internet computers, to
access the local host resources or devices as needed. UPnP devices can be automatically
discovered by the UPnP service application on the LAN.
UPnP Screen
Label
Description
UPnP
Enable or disable UPnP.
Enable NAT-PMP
NAT-PMP allows a computer in a private network (behind a NAT router)
to automatically configure the router to allow parties outside the private
network to contact itself. NAT-PMP runs over UDP. It essentially
automates the process of port forwarding.
Check the box to enable NAT-PMP.
UPnP List
This table lists the current auto port forwarding information.
Application:
The application that generates this port forwarding.
Ext Port:
The port opened on WAN side.
Protocol:
The protocol type.
Int Port:
The port redirected to the local computer.
IP Address:
The IP address of local computer to be redirected to.
Status:
This status shows if the entry is valid or not.
Security Setting
1. IP Filter
Filters are used to deny or allow LAN computers from accessing the internet, and allow or
deny WAN hosts to access LAN computers.
