43
Technical Details
Projector not charging
Possible Causes
Solution
There is no power.
Check to ensure the power outlet source is good.
Check the power adapter to ensure a proper con-
nection with the wall outlet as well as the projector.
The projector is not set to the “OFF” Mode.
Connect the power cord to the P400+. Connect the
other end of the power cord into the wall power
source. Toggle the “On/ Off” switch to the “OFF”
Position.
When the projector is fully charged, the LED light
on the side of the projector will turn green. Allow
approximately 3-4 hours to fully charge the the
projector.
Troubleshooting
Summary of Contents for P400+
Page 1: ...aaxa TECHNOLOGIES User Guide P400 Mini Short Throw Projector ...
Page 25: ...Office Menu 19 In the Main Menu select the Office icon to access the N Docs app ...
Page 38: ...Language 32 In the Language Settings menu you can select your preferred language ...
Page 40: ...34 Projection Direction Front Vertical Rear Vertical Rear Inverted Front Inverted ...
