Getting Started
1. If using a power supply connect the power adapter to the P3X.
**If running the P3X on the battery power proceed to step 3.
2. Plug the opposite end of the power cord into a wall outlet.
3. Press the POWER button on the keypad and hold for 2-3 seconds to start the
projector.
4
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and hold the power button on the keypad for 3 seconds.
2. The optical engine should power off and the fan should stop spinning.
Note: The P3X Projector battery does not charge when it is in operation.
**The P3X is equipped with an internal lithium-ion battery and can be used without the power supply.
Be sure that the battery is fully charged before the first use.
