22
forward when cutting higher hedge
and the cutting area out of sight.
21. Do not to rush and do not attempt
to cut too much with one stroke of
the cutting blade.
NOTE:
Try to keep the cutting blade
angled at approximately 15° to the
cutting surface.
22. Cut in a number of stages if the area
being cut is particularly long to
achieve a better result; smaller
cuttings will allow for easy
composting.
NOTE:
When shaping it is advisable
to achieve a trapezoidal shape. A
trapezoidal cut corresponds to the
natural growth of plants and results in
optimal hedge growth, as it will
expose more light to the bottom of
the hedge.
MAINTENANCE
WARNING:
Before
inspecting, cleaning, or
servicing the machine,
remove the battery pack
from the tool and wait for all moving
parts to stop. Failure to follow these
instructions can result in serious
personal injury or property damage.
NEVER perform maintenance or repairs
while the unit is running.
WARNING:
When servicing,
Use only the manufacturer’s
recommended replacement parts and
accessories. Use of any other parts may
create a hazard or cause product
damage. Do not modify the product or
the cutting elements, An inadequate
use of these elements can cause
SEVERE PERSONAL DAMAGES OR
DEATH.
WARNING:
Do not at any
time let brake fluids, gasoline,
petroleum-based products, penetrating
oils, etc., come in contact with plastic
parts. Chemicals can damage, weaken,
or destroy plastic which may result in
serious personal injury. All service,
other than the maintenance
procedures described in this manual,
should be performed by an authorized
service center.
Checking Before Each Use
1. Inspect the product before each use
for worn and damaged parts. Do not
operate it with broken and worn parts.