4
1
DISPLAY
During normal operation the display shows the source
(Phono).
When changing settings (see “MENU FUNCTIONS”
page 7), the display will show the setting being
changed.
2
STANDBY
Press the standby button
2
to place the
phono stage
in standby mode, or to switch on the phono stage from
standby mode. When the phono stage is in standby
mode, the only light showing on the front will be a dim
LED light in the lower left corner. When you switch on
the phono stage, the outputs will be muted, and a line
will illuminate at the bottom of the display, starting in
the lower left corner.
3
MUTE / REMOTE CONTROL PAIRING BUTTON
The mute button has multiple functions. When you
press this button briefly, it will mute the outputs of
the phono stage. The display will show ‘’Mute’’.
If you are using an Apple remote, you can pair the
phono stage with one specific remote. In order to pair
your remote control with the phono stage, press and
hold the front panel mute button
3
for more than
one second. When the phono stage is ready to pair,
the display will flash slowly. To pair, press a button on
your remote control facing it toward the phono stage.
The display will show ”Paired”. Press the front panel
mute button
3
again briefly to go back to normal
operation.
You can remove the pairing, so that the phono stage
will stop responding to the remote again, by pressing
the front panel mute button for more than five
seconds. When the five seconds have passed, the
displays will flash fast. Press a button on the remote,
to complete the procedure. The display will show ”Un-
paired”. Press the front panel mute button
3
again
briefly to go back to normal operation.
4
NAVIGATION/MENU BUTTON
The navigation button is used for accessing the menu.
See ‘’MENU FUNCTIONS’’ page 7.
FRONT PANEL FUNCTIONS
