To enter the menu, press and hold the navigation button
4
for 3 seconds.
When entering the menu, the gain setting will be shown on the display.
The top line of the display shows the current option (“Gain” when entering the menu), and the bottom line shows the current setting.
Press the navigation button
4
to cycle through the options.
Use the up and down front panel buttons (
a
/
b
) to change the settings.
Once in the menu you can cycle through the options in the order shown in the diagram below. The amplifier will return to normal operation once
cycled through all the options.
MENU FUNCTIONS
SETTINGS
DISPLAY SHOWS
Gain
Using this function, you can set the gain of the amplifier. The default setting is 32dB.
Display brightness
You can change the display brightness in four steps: 10, 40, 70 and 100%
Display dim
Using this setting, you can set the display to switch off automatically after 1-5 seconds. The standard setting is ”dim off”. When the
display is off, a single dim LED will be lit in the lower right corner.
Temperature
This menu option shows the current operating temperature of the power amp.
Software version
This menu option shows the current firmware version of the amplifier.
6
