A
UP - used for changing menu settings.
B
DOWN - used for changing menu settings.
C
INPUT +, Press this button, to move to the next input. From Line 1 to Line 2 etc.
D
INPUT -, Press this button, to move to the previous input. From Line 2 to Line 1 etc.
E
STANDBY, Press this button to place the DAC in standby mode, or to switch the DAC on
from standby mode.
F
MENU, Use this button to enter the menu, or switch back to normal operation. Use the INPUT +
and INPUT - buttons to cycle through the menu, and the VOLUME UP and VOLUME DOWN buttons
to change a setting. See “MENU FUNCTIONS” for details.
G
MUTE
Press the button to mute the outputs of the DAC. Pressing the button again will reactivate
the outputs of the DAC.
INFO
Press this button, to cycle through the information items from the menu. This displays the operating
temperature of the amplifier and the software version.
FACTORY RESET
You can reset all settings back to factory defaults. This will erase all settings. To do this, proceed as follows:
• Switch off the DAC at the main power switch
9
• Wait 30 seconds
• Press and hold the three front panel buttons
2
3
4
• Switch on the main power using
9
, while still holding the front panel buttons
• All LED indicators on the front panel will switch on, and stay on
• After approx. 8 seconds the LED indicators will switch off again.
• Release the front panel buttons, and switch off the DAC using the main power switch
9
APPLE REMOTE
6
A A A A A A A
A
D
C
E
F
G
B
