SETTINGS
DISPLAY SHOWS
Display dim
Using this setting, you can set the display to switch off automatically after 1-5 seconds. The standard setting is ”dim off”. When the
display is off, a single dim LED will be lit in the lower right corner.
Home theatre bypass
Using the home theatre bypass function, you can setup one of the inputs to use a fixed volume setting. Choose the input you want to use,
or ”Disabled” to use all inputs as regular inputs.
Home theatre bypass level
If you have setup one of the inputs as a home theatre bypass input, you can set the fixed volume level using this menu option. 0dB (full
volume) is often used, but any level can be set.
High pass frequency
This setting, and the following two settings, are only shown if the optional active crossover module is fitted.
Use this setting to change the crossover frequency of the high pass output
Low pass frequency
Use this setting to change the crossover frequency of the low pass output.
Low pass level
Using this setting, you can trim the output level of the low pass output in 0.25dB steps. The range is +/-6dB.
Software version
This menu option shows the current firmware version of the preamp.
MENU SETTINGS (continued...)
8
