AAVARA PB5000, User Manual

Page: 9 / 23

9
Video Source/Sender:
Field Description
Channel Range 1 ~ 9999, Auto assign or manual change, each sender must have Unique
Channel Number assign. No two or more Senders got same channel number.
IP IP Address (Auto assign, or go Unit cfg.html for static IP assign)
Group
Sender’s Group name for further management requirement.
Codename
Sender’s Codename / Video Source name for further operation required.
Reset EDID Reset Sender EDID table to factory default
Audio Input Select Select Audio Source from HDMI or Analog Audio Input
Device Control ID Match Device ID in Device Control CSV File (control by CEC(HDMI)/IR/RS232)
RS232 Mode IP Command Rs232 command issue by IP command
Pass-Thru RS232 command pass-thru between sender and receiver rs232 ports
RS232 Baudrate Assign RS232 Baudrate, range 115,200 ~ 300 bps
Display/Receiver:
Field Description
ID Auto or Manual Assign, Each Receiver must have Unique ID Number assign. No two or
more Receivers got same ID number.
IP IP Address (Auto assign, or go Unit cfg.html for static IP assign)
Group
Receiver’s Group name for further management requirement.
Codename
Receiver’s Codename / Display name for further operation required.
HDR/3D/Surround Enable (checked) / Disable (uncheck) EDID Copy to support HDR, 3D and Surround
Sound output (LPCM/Dolby/DTS)
Device Control ID Match Device ID in Device Control CSV File (control by RS232)
RS232 Mode IP Command Rs232 command issue by IP command
Pass-Thru RS232 command pass-thru between sender and receiver rs232 ports
RS232 Baudrate Assign RS232 Baudrate , range 115,200 ~ 300 bps
Notice!
1.
Please wait for few sec. AV Master will search all senders and receivers on network.
2.
Each Sender must assign a unique video channel (CH) number,
DON’T have two Senders with same
number.
3.
Group name and Codename supports English, French, Latin, German, Chinese and Japanese fonts, but it
won't be able to show on OSD. Use underscores instead of spaces for the Group name and Codename fields.
4.
If USB & RS232 setting changed, the unit will auto reboot to get new settings effect.
5.
If any of HDMI device connected to Sender or Receiver
doesn’t not supports 3D or Multichannel audio,
recommend that keep 3D Video & Surround option off to speed up video channel switching and maximum
EDID compatibility.