background image

3

The product is state of the art and complies with the associated technical safety requirements. Never-
theless, a low level of residual risks cannot be ruled out. Please observe the safety instructions to this 
end. 

All serious incidents occurring in relation to the device must be reported to the manufacturer and to the 
competent authority of the Member State where the user and/or occupant is established.

 WARNING

Failure to observe this user manual, in particular the safety instructions can lead to defects in the 

V-MAX

mini

 and endanger the operator and the occupant, as well as aff ect it in its proper function! There 

is an increased risk of injury! In the event of an infringement, claims for warranty and liability are exclud-
ed!

Persons with visual and reading impairments or mental disabilities should print out the user manual
available on the website in enlarged letters or have this manual read to them, if necessary. You will also 

fi nd all safety-relevant 

changes that have been made to the user manual on our homepage. All versions 

with details of the production period of the product are obtainable at:

www aat-online de/gb > Downloads > Rehabilitation > User manuals > V-MAX mini

Summary of Contents for V-MAX mini









































Reviews: