23
Loosen the screws.
Turn and insert the switching
strip. Observe the arrows.
Tighten the screws.
Removing the battery pack
Carry out the steps listed in the chapter "Battery pack"
in reverse order. Please note that the fl ight mode
(crossed out lightning) must be established for the lithium-ion battery pack if it is being transported.
7 Removal
Removing the anti-tip supports
Pull the locking pins and re-
move the anti-tip supports.
Removing the drive unit and handles
Pull the locking pins and
remove the operating and
pushing handle.
Insert the handles back into
the corresponding mounts.
Disconnect the power ca-
ble, lift drive by the carrying
handle and take it out of the
bracket.
