AAT MAX-E Q1604 Translation Of The Original User Manual Download Page 10

10

4 4  Technical data

   WARNING - Do not exceed the total permissible weight and the maximum weight of the person, 

as this may lead to defects or an overloading of max-e! 

 

i

  NOTE - Observe the technical data.

Technology

max-e

Drive dimensions

Width: min. 300 - max. 700 mm; height: 290 mm; depth: 153 mm

Own weight

Drive unit: 9.1 kg; battery pack: 10.1 kg; operating unit: 0.5 kg;  

power cable: 0.3 kg; battery bag incl. Velcro tapes: 0.2 kg; 

Total weight max-e (without wheelchair): 20 2 kg;

charger: 0.3 kg

Total permissible weight

200 kg (person, wheelchair, max-e)

(1)

Possible wheel sizes in inches

20, 24

Limit values during construction

From seat width 28, max. 0° camber

Widening of wheelchair by attachment

max. 3.6 cm

Speed forward I backward

6 km/h  I  3 km/h

Range with one charge of the batteries

up to 16 km 

(2)

Rated slope with a weight of the person of  

up to 80 kg I from 81 kg to 160 kg 

max. 20 % (11.3°) 

(3) 

I max. 16 % (9°) 

(3)

Lead gel battery pack

2 x 12 V / 16 Ah

Direct current motor

24 V / 130 W

Noise information

The A-weighted sound pressure level is typically below 61 dB (A)

Switching/actuating forces

Joystick: 3.5 N; buttons (ON/OFF, horn, speed): 0.74 N 

Emergency release button = 0.74 N

Static stability downhill / sideways

Observe the wheelchair manufacturer’s information

Turning circle diameter

Observe the wheelchair manufacturer’s information

Tire pressure / Hand rim diameter

7 bar / 540 mm

Maximum surmountable obstacle height

Observe the wheelchair manufacturer’s information and chapter 6.4

Storing/operating temperature: Device

0° C to +60° C / -20° C to +50° C

Storing/operating temperature: Battery pack

0° C to +40° C / -20° C to +50° C

Charging temperature: Battery pack

0° C to 40° C

Vibration information

The weighted RMS value of acceleration, to which the upper body is 

 subjected, is typically below 2.5 m/s2.

Adhesive label with serial number

Drive unit and back of the user manual

 

(1) Observe the maximum load according to the wheelchair manufacturer's information.

(2)  According to ISO 7176-4, the distance range depends, among other factors, on the weight of the transported person, the ground, the terrain profile, the 

ambient temperature, etc.

(3) Climbing and braking ability also depend on the surface, terrain profile, ambient temperature etc.

Summary of Contents for MAX-E Q1604

































Reviews: