Integrated Access Controller –
Installation manual
12
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
All rights reserved.
Programming
-
Basic Programming is the same as Standalone Mode
-
There are some exceptions for your attention:
KDH
-
KZ330 connected with External Card Reader:
If EM card reader or HID card reader: users can be added/deleted on either con-
troller or external reader.
KDH
-
KZ330 connected with Keypad Reader:
The keypad reader can be 4 Bits, 8 Bits (ASCII), or 10 Bits output format.
Choose below operation according to the PIN output format of your reader.
Set Wiegand Input Formats
Please set the Wiegand input formats according to the Wiegand output format of
the external Reader.
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Wiegand input bits
8 (26~37) #
(factory default is 26bits)
3. Exit
*
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. PIN Input format
8 (4 or 8 or 10) #
(factory default is 4 bits)
3. Exit
*
Remarks: 4 means 4 bits, 8 means 8 bits, 10 means 10 digits virtual number.
Add PIN Users:
To add PIN users, after entering into the program mode, PIN(s) can be input/
added on either controller or the external Keypad Reader, except when the Key-
pad Reader is 10Bits virtual card number output, the PIN(s) can only be input/
added through the Keypad Reader.
Delete PIN Users:
the same way as add users
.
Notes:
User ID number
: Assign a user ID to the access card in order to track it. The
common user ID number can be any number from 1~598, the panic user ID
is from 599~600. IMPORTANT: User IDs do not have to be proceeded with
any leading zeroes. Recording of User ID is critical. Modifications to the user
require the User ID be available.
Proximity Card
: Any 125KHz industry standard 26 bit EM, HID and Mifare
Proximity card or Tag.
PIN:
Can be any 4~6 digits except 8888 which is reserved.
Summary of Contents for KaDe KDH-KZ330U-BLACK
Page 16: ......
