8
Model Venture IP 480i System Guide
Set Management
The display indicates the Server Address.
8.
Press
Change
to edit the Server Address; otherwise, proceed to Step 11.
9.
Edit the Server Address.
10.
Press
Done
.
11.
Press
Next
.
The display indicates “
Clean Database?
” By default, it is disabled.
Caution:
Cleaning the database removes ALL user data.
12.
Press
Change
to enable Clean Database.
13.
Press
Next
.
The display indicates “
Test Load First?
” By default, it is enabled
(recommended).
14.
Press
Change
to disable Test Load First.
15.
Press
Next
.
The display indicates “
Upgrade All?
” By default, it is disabled.
Caution:
Upgrade All upgrades ALL the sets in your network.
16.
Press
Change
to enable Upgrade All.
17.
Press
Next
.
The display indicates “
Start Upgrade?
”
18.
Press
Yes
.
The display indicates “
Upgrade In Progress…
”
The phone restarts. The process takes a few minutes.
Fresh Start
FreshStart returns a set to its factory settings.
This option should be used
with caution
.
It deletes user data, including directory information, voicemail
settings and messages, and the DN.
To FreshStart a phone
1.
Navigate to
FreshStart
.
The display indicates “
Extension:<xxx> Remove & Refresh?
”
2.
Press
Yes
.
Reset Password
Reset Password allows the administrator to reset a user’s password
to the default value “
12345
”. To reset a password, this must be done at
the user’s telephone.
1.
In
System Options
, navigate to
Set Management
and press
Select.
2.
Navigate to
Reset Password
and press
Select
.
3.
Press
Yes
to reset the user’s password to “
12345
”.