TA7014i Hardware Installation
© 2014 Aastra Sweden | 154_1531 ANF 901| A | 2014-05-15
13
Preventing Electrostatic Discharge Damage
Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip
to earth ground to channel unwanted ESD voltages to ground safely.
3.3
Required Mounting Tools and Equipment
You will need the following tools and parts to properly install the TA7104i:
ESD-preventive wrist strap.
In addition, you might need the following external equipment:
Modem for remote access.
RJ-45 cables for the WAN and LAN connections.
3.4
Unpacking and Inspection
If you haven’t already done so, unpack the TA7104i device. Carefully remove it from the
package and packing material. The TA7104i package contains the following items:
1 x TA7104i unit
1 x power supply for the country in which you are using the TA7104i
1 x Bumpon
TM
kit for desktop use
1 x Printed Flyer
You may also need additional 10/100 BaseT Ethernet RJ-45 cables.
3.5
Location and Mounting Requirements
Warning:
The analog lines of the TA7104i are not intended for connection to a
telecommunication network that uses outside cable.
Warning:
To prevent fire or shock hazard do not expose the unit to rain or moisture.
The TA7104i is suited for use in an office or residential environment where it can be wall-
mounted or free standing.
Location
Install the TA7104i in a well-ventilated location where it will not be exposed to high temperature
or humidity. Do not install the TA7104i in a location exposed to direct sunlight or near stoves or
radiators. Excessive heat could damage the internal components.
When deciding where to position the TA7104i, ensure that:
