Aastra OpenCom 100, Quick Reference Manual

Page: 31 / 48

29
PIN Dialling
This feature cannot be used with a SIP terminal.
H#46 Z
(internal call no. of the telephone used, e. g. “102”)
*
Z (your user PIN) # Z (destination no.)
You switch the telephone to a user group determined by the system administrator for
the next call. Switching the user group involves different authorisations (e. g. interna-
tional dialling authorisation) and possibly other features (e. g. for billing and
recording connection data of private calls). Please contact your system administrator
for information on the system configuration and the designated application for PIN
dialling.
First you enter the internal call number of the telephone you wish to make a call from
and then your user PIN. Then you can dial the desired call number.
Note
PIN dialling is available on any terminal in a user group with this authorisation acti-
vated. The call number dialled using PIN dialling is not saved in any redial list, neither
on the terminal used, nor on one’s own terminal.
Switch authorisation
This feature cannot be used with a SIP terminal.
on:
H*52* Z
(internal tel. no.)
#
off:
H#52* Z
(internal tel. no.)
#
You switch another terminal to a user group defined by the system administrator.
Switching the user group means different authorisations, e. g. international dialling
authorisation. The switch only applies to the next call made from this terminal. Please
contact your system administrator for information on altered authorisations when
switching the user group. Enter the internal call number of the terminal whose
authorisation is to be switched.
Note
When the terminal to be switched is currently in the call state, the authorisation
switch is carried out after the call is completed. If the next call is not begun within
60 seconds, the authorisation switch expires automatically.