Aastra NeXspan S Installation And Maintenance Manual Download

Page: 18 / 87

Page

01/2007

AMT/PTD/PBX/0062/1/2EN

LIMITATIONS:

All the SIP (DECT/IP) subscriptions must be declared on the Call Manager with which the GSI
gateway (SIP access point) is established.

Therefore:

If the GSI gateway (SIP access point) is located on an NCS (F5), the SIP subscriptions must be
declared on F5.

If the SIP access point is located on an IPS card of a NeXspan iPBX (F6), the SIP subscriptions
must be declared on the F6 fitted with the IPS card.

3.8 RFP

3.8.1 PRÉSENTATION

The DECT RFP transmits and receives radio signals to and from the PP.

This RFP is directly connected to the LAN, declared and managed as an IP element from the
OMM interface.

The RFPs used for this IP DECT service are:

•

RFP32 IP: a 12-channel RFP (8 for voice and 4 for signalling) meant for interior
installation only

•

RFP34 IP: a 12-channel RFP (8 for voice and 4 for signalling) meant for exterior
installation

Any RFP in an IP DECT installation can be chosen to work not only in RFP mode, but also in
OpenMobility Manager (OMM) mode.

Others are in RFP mode only.

Summary of Contents for NeXspan S
























































































Search results

Summary of Contents for NeXspan S

Reviews:

Related manuals for NeXspan S

Brands by name

Popular brands

Aastra NeXspan S, Installation And Maintenance Manual

Search results

Summary of Contents for NeXspan S

Reviews:

Related manuals for NeXspan S

Brands by name

Popular brands