
Call modes
9
Using the pre-dialing mode
The pre-dialing mode is used to enter, display and/or correct a number before it is dialed
(this mode is useful when entering long numbers, such as international numbers).
Note
: this function is proposed by default; however, it may be replaced by the search by name function from
the private directory, depending on the personalized handset configuration (see section Personalizing the DECT
handset).
1 - Enter
your party's number.
.
Validate
P
Pa
au
us
se
e
within 2 seconds, if you want to record
a pause after the line seizure prefix.
After 3 seconds
E
Er
ra
as
se
e
is displayed.
If an error occurs:
-
Validate
E
Er
ra
as
se
e
or select the character to be replaced
with
and enter the new digit.
2 - Validate
C
Ca
al
ll
l
to make the call.
You can also press the
green key
.
The line is seized and the number is dialed automatically.
Adjusting the loudspeaker and earpiece volume level
You can adjust the loudspeaker volume level according to 2 levels and the earpiece volume
level according to 5 levels.
During a call:
-
Press the
or
keys (once or several times)
on the side of the handset.
- loudspeaker on: the volume level of the loudspeaker
is adjusted (2 levels),
- loudspeaker off: the volume level of the handset
earpiece is adjusted (5 levels).
Note
: the handset beeps to warn that the maximum or minimum levels
have been reached.
X
XX
XX
XX
XX
XX
XX
XX
XX
XX
X_
_
P
Pa
au
us
se
e
C
Ca
al
ll
l