Aastra 6700i Series, Installation Instructions Manual

Page: 48 / 88

A
ASTRA
6700
I
SIP T
ERMINALS FOR
MX-ONE
48 26/1531-ANF 901 14 Uen E10 2014-01-22
logs on with another telephone. Speed dial data initiated via MX-ONE
follows the user.
To program speed dial to a programmable key (hard key) that is empty
from the phone UI:
1. Press the key for a couple of seconds until the input field appears
in the display.
2. Enter the name and the number (or procedure with * and #).
Note: In 6735i/55i and 6737/57i the recommendation is to not use the
phone UI for the programming of
softkeys as speed dial keys
because it will interfere with the keys used by the system. In
6739i it is ok when using the
Options key > Softkeys to
program the softkey with higher key number than 8.
To program a speed dial key (hard keys and soft keys) from the web UI:
1. Click on: Operation > Softkeys and XML or
Operation > Programmable keys or
Operation > Expansion Module
2. Enter the name and the number (or procedure with * and #).
Note: Do not program softkey 1-8 because these can interfere with keys
used by the system.
To edit an existing speed dial key from the phone UI:
Options > Preferences > Speed Dial Edi t.
11.13.5 Assigning MNS Keys
The shortcut keys can be configured as monitoring keys (that is,
assigned to monitor other extensions). The LED of the shortcut key is
used for indicating the status of the monitored extension. By pressing the
shortcut keys, calls to monitored extensions can be answered. Secretary
functions is one example of this.
Monitoring keys are configured from the PBX.
To get the MNS key working, some parameters in the configuration file
have to be enabled, see section 11.2 Settings in the configuration file
aastra.cfg on page 30.
It is possible to change the type of ring signal (periodic, muted, visual
only etc.) for the MNS key and it is changed from the PBX or from
Manager Provisioning. The default value is visual only. No settings for
this can be done in the aastra.cfg file.
It is also possible to set a pop-up option for monitoring keys. With this
feature enabled, the page containing a monitor key is displayed when a