12 Model 57i IP Phone Installation Guide
Installation and Setup
Headset (Optional)
Turn the phone over and locate the headset jack marked
f
. Insert the
headset cord into the jack until it clicks into place. Then route the headset
cord through the groove as shown in the above illustration.
Desk or Wall Installation
Install on the Desk
The desk installation for the 57i IP phone consists of two legs that attach to
the back of the phone near the top corners. A total of four different
viewing angles allows users to personalize their phone viewing preference.
Attach each leg by inserting the tabs on the leg into the slots on the bottom
of the phone. There are three pair of leg slots on each corner of the phone;
each leg uses two pairs (1&2, or 2&3) giving two leg positions designating
different viewing angles. Furthermore, the legs can be reversed which
offer two additional viewing angles.
To Handset
To Headset