Enhancements/Changes in 2.0.2, Build 1040
12
RN-001029-00, Release 2.0.2, Rev 02
IP Phone Release Notes 2.0.2
DEF04929
Pressing a speeddial key while on an active call no longer places that call on hold.
When there is an active call, the speeddial key now sends DTMF digits through the
active voice path. For example, if you are on an active call, and a speeddial key is
configured on a different line to access your voicemail, you must put the active call
on hold and then press the speeddial key to access your voicemail on the other line.
DEF05224
The “Action URI Registered” is now executed on the first successful registration of
each unique line configured on the phone.
DEF05722
Increased the length of the stuttered dial tone used to indicate message waiting.
DEF05964
Usernames containing dots (“.”) are now supported.
ENH05637
The IP phones no longer support the alpha character in the password.
Non-numeric passwords are ignored in release 2.0.2 and all subsequent releases.
The default password is used instead.
ENH06153
Allow Barge In Feature
A User and Administrator can now configure a “barge-in” feature on the phone.
A new parameter has been added (“
sip intercom allow barge in
”) which controls
how the phone handles an incoming intercom call when an active call is in progress.
When you enable this parameter (1 = enable), which is the default value, an
incoming intercom call takes precedence over any active call, by placing the active
call on hold and automatically answering the intercom call. When you disable this
parameter (0 = disable), and there is an active call, the phone treats an incoming
intercom call like a normal call and plays the call warning tone.
An Administrator can set this parameter using the configuration files (
sip intercom
allow barge in
) or the Aastra Web UI (
Allow Barge In
at
Basic
Settings->Preferences->Incoming Intercom Settings
). A User can set this parameter
using only the Aastra Web UI.
ENH06301
REFER-TO header now uses uppercase characters in escape codes.
Issue Number
Description of Feature/Enhancement
Allow Barge In
(in Web UI) (Default is enabled.)
