Enhancements/Changes in 2.0.2, Build 1040
10
RN-001029-00, Release 2.0.2, Rev 02
IP Phone Release Notes 2.0.2
Enhancements/Changes in 2.0.2, Build 1040
This section describes the enhancements and changes made for release 2.0.2.
Note:
Unless specifically indicated, these enhancements apply to all
phone models
.
Issue Number
Description of Feature/Enhancement
CLN05071
Added support for virtual web servers, by adding the “Host” header to all XML GET
requests from the phone.
CLN05088
Redial list now remembers pause key presses.
CLN05089
Redial list is now accessible during active calls.
DEF04183
Sidetone is now only enabled during calls.
DEF04481
VLAN: Added an additional VLAN mode which enables the phone to be on a VLAN.
All untagged packets are sent to the passthrough port.
To enable this mode, you enable tagging on the phone port as normal, but set the
passthrough VLAN ID to 4095,.
For example, the following configures the phone to be on VLAN 3 but the
passthrough port is configured as untagged.
tagging enabled: 1
VLAN id: 3
VLAN id port 1: 4095
DEF06238
VLAN: The SIP and RTP DSCP default values are now set according to RFC4504.
Parameter
Old Default
New Default
tos sip
24
26
tos rtp
32
46
