Operator phone
Aastra 5380/Aastra 5380ip
131
eud-1282/1.3 – R3.0 – 04.2013
Activating/deactivating functions by remote control
You are not at your desk and want to set various functions on your phone from a dif-
ferent phone.
You can activate/deactivate many of your phone's functions by remote control from a
different internal phone. Remote control has to be enabled for your phone in the sys-
tem.
The remote control is initiated using a special function code. You can then enter the
function commands and function codes.
<Function code>
Using remote control from a third-party phone:
1. Enter function code #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the function code for activating/deactivating the function you want.
Pick up the handset.
➔
You hear the acknowledgement tone.
Put the handset on-hook.
➔
The function is activated/deactivated.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter
or use the function code *47
(see "User’s Guide Function Codes" on the
). If you have forgot-
ten your PIN, your system administrator can reset it to the default setting.
☛
