Aastra 400 Series System Manual Download Page 58 | Manualshive

Page: 58 / 592

Aastra 400 Series System Manual Download Page 58

Numbering plan

58

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

•

Default SIP

Standard SIP terminals

•

GSM/AMC

See

"Mobile phones", page 58

and

"Aastra Mobile Client (AMC)", page 62

•

AMC+

Mobile phones that are connected to the communication server via WLAN using
a AMC Controller.

•

BRI-S bus

Terminals on the S bus (ISDN terminals, PC cards, etc.)

•

Virtual

See

"Virtual terminals", page 66

If an internal user is assigned a name, the user in question can be dialled internally
by entering the name instead of the call number (dialling by name), and the name
is displayed on the destination user’s terminal on the system’s own communication
server, or another PINX in the PISN (CNIP).

3. 2. 5. 2

Mobile phones

Although the communication server does not have a GSM receiver, mobile phones
can be connected to Aastra 400. The mobile phone is assigned to a user and can be
reached internally using his user number. If the mobile phone user dials a call
number specially set up in the communication server, he can execute certain fun-
cions via */# function codes (see

) or make internal/external calls.

With the Aastra Mobile Client application for mobile phones all the main telephony
functions are available with menu prompting.

«
...
56
57
58
59
60
...
»

Summary of Contents for 400 Series

















































































































































































































































































































































































































































































































































































































Reviews:

No comments