manualshive.com logo in svg

Aastra 400 Series, System Manual, Page: 62 / 592

Share
Download
Aastra 400 Series System Manual Download Page 62

Numbering plan

62

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

Note:

In the case of an external call to an integrated mobile phone the caller’s 
CLIP is always transmitted to the mobile phone as redirecting informa-
tion. This also applies to external calls to a user who has redirected to an 
integrated mobile phone. In this case the parameter 

Send redirecting 

information

 must be set on 

Yes

 in the trunk group settings and "Special 

Arrangement" must be activated by the network provider.

Tip:

The mobile phone integration described above is not limited to mobile 
phones; it can be used in principle for any external users.

See also:

A separate User’s Guide is available for the mobile phones on Aastra 400. 
It includes an overview of the functions that can be carried out using 
mobile phones.

3. 2. 5. 3

Aastra Mobile Client (AMC)

The Aastra Mobile Client is an application for the most common mobile phones 
with open operating systems. It means that the main telephony functions are avail-
able through menu prompting.

One 

AMC Extension

 licence is required for each Aastra Mobile Client. This licence 

also includes the 

Mobile Phone Extension.

 licence.

To set up an Aastra Mobile Client, proceed as follows:

1. Purchase a 

AMC Extension

 licence and enter the licence code in AMS. In addition 

to the licence code an Aastra Mobile Client access code is also printed out. You 

Enhanced function for directly 
incoming calls

<

Yes

 / 

No

>

• Trunk group setting: Allows the use of features of 

integration level 2 if mobile phone integration is 
made with separate lines to the provider 
(depends on the provider).

MWI route

<Route number>

• Route for MWI signalling (new voice mail voice 

message) to the integrated mobile phone.

MWI CLIP

<CLIP No.>

• The CLIP for MWI signalling (new voice mail voice 

message) to the integrated mobile phone is 
entered here. (input format the same as an exter-
nal call number e. g. 00326553827). The CLIP is 
transmitted in accordance with the 

Transit CLIP 

format

 parameter for trunk group settings.

Parameter

Parameter value

Remarks

Summary of Contents for 400 Series

















































































































































































































































































































































































































































































































































































































Reviews:

No comments