12
Selecting the Temperature
Select the temperature you wish to operate at and press that button.
The LED light above the selected button will illuminate (green)
There are four Buttons for Temperature:
1.
Ambient temperature
a)
Press “Ambient” (Room temperature) button.
b)
The LED light above the button will illuminate.
c)
The Darvall Cozy Warm Air Heater will draw in room temperature air through the HEPA filter.
2.
32°C
a)
Press “32°C” (LOW temperature) button.
b)
The LED light above the button will illuminate
c)
The Darvall Cozy Warm Air Heater will heat HEPA filtered air to LOW temp. setting = 32°C.
3.
38°C
a)
Press “38°C” (MIDDLE temperature) button.
b)
The LED light above the button will illuminate.
c)
The Darvall Cozy Warm Air Heater will heat HEPA filtered air to MIDDLE temp. setting = 38°C.
4.
43°C
a)
Press “43°C” (HIGH temperature) button.
b)
The LED light above the button will illuminate.
c)
The Darvall Cozy Warm Air Heater will heat HEPA filtered air to HIGH temp. setting = 43°C.
Temperature “In Range” Indicator
(red light) will be turned off when the actual exhaust air
temperature reaches the setting temperature (±3°C).
Switching to Operating Mode using the Power Button
1.
Press ON / OFF button to switch the Darvall Cozy Heater from Standby Mode to Operating Mode.
2.
The Darvall Cozy Heater will blow air and the Heater Hose temperature will gradually increase.
3.
The temperature selection can be changed anytime when the Darvall Cozy Heater is in operating by
pressing the desired temperature Button.
Adjusting the fan speed
– Press the Air Flow Button to toggle between High and Low fan speed.
Air Flow: High
Temp: 32°C
Total Run Time:
00 Hours 00 Min.