background image

GUARANTEE 

Once again we would like to thank you for buying
a Becton fire. 

When you buy an 

Aarrow Fire,

you are not only

buying a first class appliance - you are buying a
commitment from us to look after you and your
appliance.

The Becton Gas Stoves come with a 

Lifetime Guarantee 

against splitting or

cracking of the main body. The main body being
defined as the steel outer casing and items fixed
immovably to the casing. All other parts are
covered by a one-year no-quibble parts Guarantee.

This Guarantee shall not apply to any part that has
been altered in any way, or which in our judgment
has been subjected to misuse, neglect, accident,
abuse and fair wear and tear.
This Guarantee shall not include or extend to paint,
glass or coal matrix and does not cover installation
and operational related problems such as use of
unapproved fuel, down draft or spillage caused by
environmental conditions and inadequate 
ventilation.

Claims are not valid where the installation does
not conform to local Building Regulations.

The Guarantee is conditional upon the appliance
being serviced and checked annually by a qualified
gas engineer.

The Manufacturers decision shall be final.

If your appliance proves to be defective as a
result of faulty materials or workmanship
during guarantee, we will repair or replace it
FREE OF CHARGE as long as the fire has been
installed according to the these instructions and
by a CORGI Registered fitter, who has
completed and signed the Installation Check
List on page 17. The fire must also be serviced in
accordance with these instructions and the
record of Annual service on page 30 should be
completed by your service engineer.

All Guarantee periods commence on the date of
purchase and are non-transferable.

Our Lifetime Guarantee is offered as an addition to
your statutory rights.

If you think your fire is not working correctly or in
the event of a breakdown, 

please call your local

dealer.

When you contact them, they will want to know:

1.Your Name, Address/Post Code and Telephone
Number
2.Serial Number
3.Clear and concise details of the fault

CUSTOMER REGISTRATION

See card enclosed

To guarantee the very best in after-sales service,
do not forget to complete and return your
Customer Registration Card within 14 days (a
stamp is required).

Just complete the form and return it to us to:
1. Benefit from our 

Lifetime Guarantee.

2. Register your appliance for a full year's Parts
Guarantee.

Please contact us direct 01308 427234 if no
Customer Registration Card is included.

Becton Bunny & Becton 7 mk3 Gas stoves

29

GUARANTEE

Summary of Contents for Becton 7 MK 3

































Reviews: