HW © 2015 Aaronia AG, DE-54597 Strickscheid,
www.aaronia.com
11
Manual RF Signal-
Generator
3.4.
Battery / Power supply
All BPSG Signal Generators come with internal LiPo-Battery which offers 3 – 4 hours run-
time.
The charging time for the LiPo-Battery is about 90 minutes. The Charge-LED will turn red at
the beginning of the charging process. When charging is complete, the Charge-LED turns
green.
By pressing the ON/OFF switch, you can turn the Generator on and off. When the Generator
is turned on, the ON/OFF LED lights red.
For a continuous operation, the included power supply can be used.
You can connect also other DC sources with 12V. As connecting plug a 3,5mm jack plug
has to be used. The connecting plug has to be poled as follows: The inner pole is “+” and the
outer pole is “-”. With our optional power adapter for the cigarette lighter (see our pricelist)
you can charge or operate signal generator also in the car.
4. Application Examples
•
Attenuation tests
•
EMC - radiated immunity pre-compliance testing
•
Generating modulations (AM, FM, PM)
•
Wireless communications systems
•
Microwave point to point backhaul radios
•
Software Defined Radio (SDR)
•
Radar
•
Automated Test Equipment (ATE)
•
Sweeping and hopping
•
Scalar Network Analyzers (SNA)
•
Complex waveform electronic warfare (EW)
•
Phase Lock Loop (PLL) Synthesizer Design
•
Local Oscillator (LO) replacement
•
Hobbyist radio development and many more...
5. First Operation
The first step should be the installation of the included Generator software. The software is
necessary to control the BPSG, change its settings, save sweep profiles and for firmware
updates.
Therefore, please use the included CD, open the Auto-Installer and follow the described
steps.
Once installed please connect your BPSG with the included USB-Cable to the PC and power
it on. The software automatically recognizes the BPSG.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
