6
Mark and drill the four bolt holes. The assembly should be positioned over ceiling
battens. Apply a generous amount of the supplied adhesive to the underside of
the base, remembering to also apply in and around the bolt holes. You have two
options of attaching the unit. (1) You can simply affix using coach screws directly
into the battens or (2) using the four supplied affixing bolts (ensure loading
distributing washers and nuts are fitted inside if using the bolt method). Any
excess bolt length can be trimmed. Apply adhesive to the bolt heads to prevent
water ingression. Either method is acceptable as long as the unit is secure!!
The bump stop should now be installed. This device provides additional
support to the dish if the vehicle is driven on rough terrain.
Bump Stop
Base of Unit mounted.
Note that only two of
the mounting bolts are
visible in the picture.
Your unit will be affixed
with four (4) bolts and
Adhesive (Glue) under
the steel Base plate.
