AAQ AutoLift AL-9500HD, Installation Manual & Operation Instructions

Page: 42 / 42

COMMISSIONING REPORT
Location of Vehicle Hoist & Vehicle Clearances
Vehicle hoist or any part of the load is positioned no less than 600mm away from any
fixed structure
Provisions have been made for effective clearances above the vehicle when the hoist is
in its fully raised position.
Markings - Hoist Checked for Relevant Marking Including:
Make & Model Number
Serial number
Rated Capacity
Reference to maintenance
Operation instructions
Screw and Nut Gaps
Hoist compliance plate showing design registration
Functional Test
Vehicle hoist has been tested and all safety devices, limit switches and control function
interlocks have been tested for correct operation.
Demonstration
The installer has demonstrated the operation of the vehicle hoist to the owner or
operator
Electrical Equipment and Controls
Lock off isolating switch installed
Emergency stop button installed
3. Details of Electrical Contractor
Trading Name:
EC Licence Number:
Address:
Telephone Number:
4. Signature
Name:
Date:
I, being the person responsible for completing the commissioning report have exercised
reasonable skill and competency when completing the report and herby certify that the vehicle
hoist has been commissioned fit for use as per the Australian / New Zealand Standard 1418.9:1996
Vehicle Hoists.