AAQ AutoLift AL-900DD, Installation Manual Operating Instructions

Page: 24 / 34

8.2Lifting procedure
To lift the vehicle, proceed as follows:

Check that the lift is in its lowest position

Check that the arms are turned in a way not to hamper the vehicle when driving.

Turn the arms and pull the extensions in a way that the pads are behind the points foreseen for
lifting as indicated by vehicle manufacturer.

Push “UP” button to let the lift go up about 10cm

Check the correct positioning of the rubber pads

Check the vehicle stability

Lift the vehicle at the desired height

Press the “LOCK” button to secure the lift on mechanical safety racks.
8.3 Lowering procedure
Push “DOWN” button for carriages to raise for some seconds disengage from safety racks and
lower it.
Hold “DOWN” button until carriages descend to minimum height
Turn the arms in a way not to hamper the vehicle when driving out and set the extensions back in
original position.
Drive the vehicle out of the working area.
24