1. Introduction
1.1
General Information
AutoLift 167261
is
a
single
post hydraulic parking
hoist
. You should read the manual carefully before you
operate
the
hoist
,
the hoist must be installed by a
competent
person, please refer to current WorkSafe
regulations Australian Standards AS/NZS 1418.9 VEHICLE HOISTS
.
We will never take
responsibility
for the damage
to
the
hoist
, car
or
personnel caused by the operation that
neglect the
manual or the operation fail to submit the operation regulation.
1.2 Statement
2.
I
ntroduction
to
the
hoist
2.1
Hoist
description
This chapter contains warning instructions to operate the hoist properly and prevent injury to
operators or objects.
This manual has been written to be used by the technicians in charge of the hoist (operator) and routine
maintenance technician (maintenance operator).
The operating instructions are considered to be an integral part of the machine and must remain with it for
its whole useful life.
Read every section of this manual carefully before operating the hoist and unpacking it since it gives
helpful information about:
-
SAFETY OF PEOPLE
-
SAFETY OF THE HOIST
-
SAFETY OF LIFTED VEHICLES
The supplier of the hoist is not liable for possible problems, damages, accidents, etc. resulting from
failure to follow the instructions contained in this manual.
Only skilled technicians of AUTHORISED DEALERS or SERVICE CENTERS AUTHORISED by
the manufacturer shall be allowed to carry out lifting, transport, assembling, installation, adjustment,
calibration, settings, extraordinary maintenance, repairs, overhauling and dismantling of the hoist.
THE
MANUFACTURER IS NOT RESPONSIBLE FOR POSSIBLE DAMAGE TO PEOPLE, VEHICLES OR
OBJECTS IF SAID OPERATIONS ARE CARRIED OUT BY UNAUTHORIZED PERSONNEL OR THE
HOIST IS IMPROPERLY USED.
Description
Lifting Capacity:
Min. height:
(100mm)
Max. Lifting Height:
(1470mm)
Column Height:
(2164mm)
Power Supply:
240V
, Single phase, 1
5
Amp
1000
Kilograms
AutoLift 167261
Installation & Operation Manual
2
