167212E
Nov. 2016
１２
SINGLE COLUMN WORKING - MOTORCYCLE ADAPTOR (OPTION)
1.
Lower the
hoist
all the way to the ground.
2.
Disconnect both cylinder hoses from the synchronous valve block.
3.
Choose the column which will work.
4.
Swivel both arms towards the center line of the
hoist
until they are parallel.
5.
Fully extend both arms
6.
Using the height blocks replace the lifting pads.
7.
Align the motorcycle adaptor and lower onto the
hoist
arms. Ensure it resets firmly on the top of the
hoist
arms.( Fig. 21)
8.
Or put the motorcycle deck on the
hoist
arms.( Fig. 22)
9.
Reconnect just one hose from the column to the T-fitting on the motor pump.(Fig. 23) ( Not the
synchronous valve block)
10.
Press the switch to raise or the lever at the power unit to lower the
hoist
.
WARNING:
During single column working, just one hose and only the T-fitting is connected.
Fig. 21
Fig. 22
to column
Summary of Contents for 167212E
Page 6: ...167212E Nov 2016 ６ Fig 3 ...
Page 17: ...167212E Nov 2016 １７ PARTS CODE AND DRAWING Fig 24 column carriage lifting arm cylinder ...
Page 21: ...167212E Nov 2016 ２１ PARTS CODE AND DRAWING Fig 25 control box detail ...
Page 23: ...167212E Nov 2016 ２３ PARTS CODE AND DRAWING Fig 26 motor pump detail ...
