29
RSMV Technical Guide
APPENDIX A: CONDENSER OPTIONS
Single Condenser Configuration
Single Condenser Per Four Modules
In Single Condenser Per Four Modules wiring configuration, the
Condenser Signal is wired to AO2 on the 1st module but not the 2nd,
3rd, or 4th modules and the Condenser Relay (RLY3) is enabled on
the 1st module but not the 2nd, 3rd, or 4th modules.
Refer to
Figure 9
, below for Prism 2 configuration.
Figure 9:
Prism 2 Condenser Configuration - Single Condenser for Four Modules
Modular Service Tool Screen
RSMV Condenser Options
Configuration Screen
RSM#1-4 CONFIGURATION
Condenser Options
1 Cond for 4 RSMVs
USE < or > TO CHANGE
Select the “1 Condenser for 4 RSMVs” option on the above Hand
Held Service Tool Screen.
Summary of Contents for RSMV ASM01686
Page 1: ...RSMV Technical Guide ...
Page 31: ...31 RSMV Technical Guide NOTES ...
