13
Select Equaliser (EQ) Effect
Press the
EQ
button on the unit or the
CUSTOM/MOVIE/MUSIC
button on the remote control to
select the preset equaliser effects.
• When
CUSTOM
(Default) is selected, the COAXIAL indicator will flash (Orange) once.
• When
MOVIE
EQ is selected, the OPTICAL indicator will flash (White) once.
• When
MUSIC
EQ is selected, the BT indicator will flash (Blue) once.
Adjusting the Bass/Treble Level in CUSTOM EQ mode
1. Make sure that the
EQ
is set to
CUSTOM
mode.
2. Press
BASS/TREBLE
on the remote control.
- The
AUX IN, BT, OPTICAL, COAXIAL
and
HDMI ARC
indicators will flash once.
3. Press
VOL+/VOL–
to adjust the bass/treble level.
4. After about 5 seconds, the
AUX, BT, OPTICAL, COAXIAL
and
HDMI ARC
indicators will flash
once again to indicate that the unit has exited
BASS/TREBLE
setup.
5. You may now press
VOL+/VOL–
to adjust volume.
Play for External Audio Devices
- Ensure that the unit is connected to the TV or audio device.
1 While in ON mode, press the
SOURCE
button on the unit or on the remote control to select the
AUX, OPTICAL, COAXIAL, HDMI ARC
mode.
2 Operate your audio device directly for playback features.
3 Press the
VOL +/–
buttons to adjust the volume to your desired level.
Tip:
While in
OPTICAL/COAXIAL/HDMI ARC
mode, if there’s no sound output from the unit and the
OPTICAL/COAXIAL Indicator flashes, you may need to activate
PCM
Signal output on your source device
(eg. TV, DVD or Blu-ray player).
Bluetooth Operation
Connect to a Bluetooth Device
The first time you connect your Bluetooth device to this player, you need to pair your device to this
player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
1 During ON mode, press the
SOURCE
button on the remote control or on the unit to select
Bluetooth
mode. The Blue indicator will flash slowly.
2 Activate your Bluetooth device and select the search mode. “
A&S Bar 300
” will appear on your
Bluetooth device list.
Summary of Contents for 2.1 Bar with Wireless Subwoofer 300
Page 1: ...USER MANUAL 2 1 Bar with Wireless Subwoofer 300 ...
Page 16: ......
