STEP 3
Set the table upright. (See photo 7.) Attach bench tops as shown. (See photo 8.) Insert 2½
”
bolts through
the table legs and tighten using the Allen wrench. (See photo 9.)
Photo 7
Photo 8
Photo 9
B
C
A
a
Page 1: ...d Benches Thank you for choosing Furniture Co We hope that this piece brings you many years of enjoyment For help with assembling your furniture or if you have missing hardware please email us at help aandlfurniture com or call us at 866 896 5747 ...
Page 2: ... Attach the braces as shown See photo 3 Slip a washer on each lag photo 4 and insert the lag into the countersunk hole in the brace See photo 5 Use the 7 16 socket to tighten the lag Use the screws to fasten the brace to the table leg See photo 6 Tighten with the included square drive bit using your screwgun power drill Photo 3 Photo 4 a d C b HARDWARE included 2 Bolts 12 Lags 2 Washers 2 Screws 4...
Page 3: ...STEP 3 Set the table upright See photo 7 Attach bench tops as shown See photo 8 Insert 2 bolts through the table legs and tighten using the Allen wrench See photo 9 Photo 7 Photo 8 Photo 9 B C A C a a ...
