PARTS
(included)
Table Top (1)
Bench Top (2)
Legs (2)
Braces (2)
TOOLS NEEDED
Screwgun/powerdrill
7
/
16
”
Socket
b
c
a
STEP 1
Lay table top upside down on a clean flat surface and attach leg as shown in photo 1 and 2. Tighten the
bolts using the included Allen wrench.
Photo 1
Photo 2
STEP 2
Attach the braces as shown. (See photo 3.) Slip a washer on each lag (photo 4) and insert the lag into the
countersunk hole in the brace. (See photo 5.) Use the
7
/
16
”
socket to tighten the lag. Use the screws to
fasten the brace to the table leg. (See photo 6.) Tighten with the included square drive bit using your
screwgun/power drill.
Photo 3
Photo 4
a
d
C
b
HARDWARE
(included)
2½
”
Bolts (12)
Lags (2)
Washers (2)
Screws (4)
Square Drive Bit (1)
Allen Wrench (1)
d
e
f
Photo 5
Photo 6
a
C
D
D
D
b
c
A
C
c
d
