manualshive.com logo in svg

A&D TM-2564G, Instruction Manual

Share
Download
A&D TM-2564G Instruction Manual Download Page 24

 

13

4-3 Installation Procedure 

Warning 

•

 

Do not use damaged cables and sensors. 

•

 

Use the specified cables and sensors only. 

•

 

The ECG unit is protected against defibrillator discharge only when the 

supplied ECG extension cable is used. 

 

1. Confirm that the power switch is turned 

off. 

2. Connect the cuff hose to the CUFF 

connector of the instrument. Use the 

1.5-m hose to extend it, if necessary. 

3. Connect the SpO

2

 extension cable to the 

SpO

2

 connector of the instrument and 

lock it. 

4. Connect the SpO

2

 cable to the SpO

2

 

extension cable. 

5.  Connect the ECG extension cable to the 

ECG connector of the instrument. 

Confirm that it is securely connected. 

6. Connect the ECG patient cable to the 

ECG extension cable. 

 

 

 

 

4-4  Printer Paper Loading Procedure 

1. Press the printer cover open switch to 

open the printer cover. 

2. Load the printer paper as shown in the 

illustration, and close the cover. 

3. Press the FEED key to check that the 

paper is fed properly. 

4.  Cut the leading edge of the printer paper 

at a right angle. 

 

 

 

Summary of Contents for TM-2564G































































Reviews:

No comments

Brands by name

Popular brands

Load more brands