21
10.2. Entering the comparator values
1. In the weighing mode, press and hold the SAMPLE key to enter the comparator
value setting mode.
2. Enter the comparator values using the following keys.
UNITS To shift the blinking digit to the right.
PRINT To increase the value of the blinking digit by one.
SAMPLE To switch the polarity.
Each time the key is pressed, “-“ is turned on and off at the left-
most digit. When on, the value is negative.
TARE
To confirm and store the setting value.
3. When the setting is complete, “
end
”
is displayed and the scale returns to the
weighing mode. (At this time, power-on-zero is not performed.)
Five-level
Three-level
Seven-level
comparator mode
comparator mode
comparator mode
