37
7. USING THE WATER JACKET
7-1. Introduction
The water jacket, is used with the SV-A Series Vibro Viscometer, to maintain the sample temperature
constant or to measure the viscosity when the sample temperature is changed. The operating
temperature range is 0°C to 100°C
The water jacket consists of the following:
Water jacket
1 pc (Main body: PC (Polycarbonate), Packing: Silicone rubber, Washer: Nylon)
Screw
1 pc (Screw: POM (Polyacetal), Washer: Nylon)
Note
•
As a heating medium, use water, isopropyl alcohol (IPA), mixture of water and IPA, or
silicone oil, which does not erode the materials described above. Using the heating
medium other than these may damage the water jacket.
•
When using the water jacket, make sure that no inner pressure is exerted in the water
jacket due to the kinked or blocked tubes, as that could exert the pressure in the water
jacket, causing it to break.
•
To control the temperature, a commercially available constant temperature bath is
required separately.
•
With the SV-H Series, the water jacket is part of the option AX-SV-54 (Cup set, sold
separately, capacity: 10 mL
・
13 mL
・
45 mL) or option AX-SV-55 (Cup set, sold separately,
capacity: 2 mL, only for the SV-1A/ SV-1H). At this time, use the optional AX-SV-51 stand
set (sold separately) if necessary. If you use the optional AX-SV-53-EX software set (sold
separately), you can easily understand the graphing data and sample characteristics in
real time.
Summary of Contents for SV-100A
Page 6: ...4 ...
