![background image](http://html1.mh-extra.com/html/aandd/smartmeter-ibloodpressure-2-0/smartmeter-ibloodpressure-2-0_instruction-manual_3095050022.webp)
E-21
Troubleshooting
Problem
Possible Reason
Recommended Action
Nothing
appears in
the display,
even when
the power is
turned on.
Batteries are drained.
Replace all batteries with new ones.
Battery terminals are not
in the correct position.
Reinstall the batteries with negative
and positive terminals matching those
indicated on the battery compartment.
The cuff does
not inflate.
Battery voltage is too low.
(LOW BATTERY
mark) blinks.
If the batteries are
drained completely, the
mark does not appear.
Replace all batteries with new ones.
The device
does not
measure.
Readings
are too high
or too low.
The cuff is not applied
properly.
Apply the cuff correctly.
You moved your
arm or body during
measurement.
Make sure you remain very still and
quiet during measurement.
The cuff position is not
correct.
Sit comfortably and still. Place your
arm on a table with your palm facing
upward and the cuff at the same level
as your heart.
––––––––––––
If you have a very weak or irregular
heartbeat, the device may have
difficulty in determining your blood
pressure.
Other
The value is different from
that measured at a clinic
or doctor’s office.
At a clinic or doctor's office
apprehension may cause an elevated
reading. Home measurement reduces
the effects of outside influences
on blood pressure readings,
supplementing the doctor's readings.
––––––––––––
Remove the batteries. Place them back
properly and try the measurement again.
Note: If the actions described above do not solve the problem, contact the dealer. Do not
attempt to open or repair this product, as any attempt to do so will make your warranty invalid.