![background image](http://html1.mh-extra.com/html/aandd/ra3100-omniace/ra3100-omniace_simple-instruction-manual_446281041.webp)
5.Trigger Setup - 5.4.Start Trigger
1WMPD4004445
41
Standby state waiting
for START trigger to
start recording
5.4. Start Trigger
The start trigger function starts recording when the trigger conditions are established for the channel
specified in the trigger source. Press the START key on the operation panel to put the product in the
standby state.
Printer recording, SSD recording, and memory recording start when the start trigger is detected.
Press START key
Start trigger occurs
Recording ends
Recording time
During record
Printer recording
SSD recording
Memory recording
Trigger occurred Trigger occurred Trigger occurred
5.4.1. Start Trigger Setup
Step 1. Tap the CH key on the side menu to display the hannel setup sub menu.
Step 2. Tap the Trigger tab on the bottom right of the sub menu to display the trigger setup screen.
Step 3. Tap the trigger menu selection on the top of the trigger setup screen (1) to display [Start
trigger].
(1) Trigger menu selection:
Switches the menu.
(2) Channel: Selects the start trigger source channel.
(3) Detection: Selects UP, DOWN, INTO WIN, or OUT WIN for the
polarity of the trigger signal.
(4) Threshold: Sets the trigger level (threshold).
(5) Filter:
Sets the filter time for noise removal.
The settings and operations of (1) to (5) are the same as the memory
trigger on page 38.