E-25
TROUBLESHOOTING
Symptom
Cause
Probable
Treatment
Power
does not
turn on.
Low Battery.
Charge the battery.
Blood Pressure
monitor internal
error.
Press the Reset Switch.
Battery charging
cable is connected.
Remove the charging cable.
The cuff
does not
inflate.
Low Battery.
Charge the battery.
The device
does not
measure.
Readings
are too
high or too
low.
You moved your
arm or body during
measurement.
Make sure you remain still and
quiet during measurement.
The cuff position is
not correct.
Sit comfortably and still. Place
your arm on a table with your
palm facing upward and the cuff
at the same level as your heart.
If you have a very weak or
irregular heartbeat, the device
may have difficulty in determining
your blood pressure.
Other
The value is
different from that
measured at a clinic
or doctor’s office.
At a clinic or doctor’s office
apprehension may cause
an elevated reading. Home
measurement reduces the effects
of outside influences on blood
pressure readings, supplementing
the doctor’s readings.
Note: If the actions described above do not solve the problem, contact the dealer.
Do not attempt to open or repair this product, as any attempt to do so will make
your warranty invalid.
