A&D HW-10KCEP, Instruction Manual

Page: 36 / 48

Page 34 HV/HW-CEP Series
14. Function Table
The function table is used to store and refer items that determine the performance of
the scale. Each item has a parameter.
The parameters are stored in the scale even if the power is removed.
14.1. Parameter Setting Procedure
Step 1 Turn off the display.
Press and hold the
TARE
key and press the
ON/OFF
key
to display software version
p-
XXX .
Press the
MODE
key to enter function setting mode.
Class
ba5fnc
.
Step 2 Press the
MODE
key to select the desired class, and then
press the
ENTER
key.
Step 3 The first item of class is displayed. Press the
MODE
key to select the desired item, and then enter a value
using numerical keypad.
Step 4 Press the
ENTER
key to store. The display returns to
class after displaying
end
.
Step 5 Press the
ZERO
key to return to normal weighing mode.
Item
Parameter
Display off
Press
and hold
and press
Class
Items
Enter using
numerical
key pad
Weighing value