A&D HW-10KCEP, Instruction Manual

Page: 17 / 48

HV/HW-CEP Series Page 15
7.1. Display and Symbols
Display and Symbols Description
A
Stability mark
When the current weight value is stable, this mark is
displayed. It means a proper condition that this value is
readable.
A
A
A
A
Zero point mark
When the
ZERO
key is pressed with nothing on the pan,
this mark is displayed. The zero point is the fundamental
starting point to weigh anything.
A
A
A
A
Net mark
When the
TARE
key is pressed, this mark is displayed.
Used to indicate that the mass of the container placed
on the pan has been subtracted from the gross value.
A
A
A
Preset tare mark
While a tare with digital input is displayed, this mark
blinks. A
Hold mark
While the display is held, this mark is displayed.
Accumulation mark
While the accumulation function is used, this mark is
displayed. A
A
Low battery mark
When the battery is depleted (becoming low voltage),
this mark is displayed. Replace with four new batteries.
A
A
A
Comparator indicator
When using the comparator function, the result is
indicated after the weight value is compared with the
upper and lower limits.
A
A
Zero point (Example)
When the
ZERO
key is pressed with nothing on the pan,
the zero point mark and the stability mark are displayed.
A
A
A
A
A
STABLE
ZERO
Weighed mass value
unit
PT
HOLD
M+