A&D HV-200KGL-WP, Instruction Manual

Page: 28 / 71

Page 26 HVG-WP Series
10. Accumulation Function
This function counts the number of weighed items, calculates the total mass value
and can display the number and accumulated mass value.
Set the parameters of the "accumulation function (
f8
)" in the function table, in
advance, to use this function.
Operation and Keys
The display of the accumulation count has a blinking without a unit.
The display of the accumulation value has a unit and a blinking .
Pressing the
MODE
key, the accumulation count and accumulation value are
displayed.
Pressing the
ZERO
key in the accumulation function ( is blinking), the current
function resets. (The count and accumulated value become zero.)
Caution
The accumulation function can be used with the first weighing unit accumulated.
This function can display a maximum of six figures.
Parameter List and Word Definition
The "near-zero" is within
±
4 digits from the zero point in the unit of kg.
The "digit", a unit of display, is equivalent to the minimum measurable mass.
The "zero point" is the fundamental starting point to weigh anything.
Function table Meaning and purpose
A
f8 0 Accumulation function not used.
A
f8 1
The scale accumulates the data, if the
F
key is pressed, when the
display is a positive stable value without near-zero. The next
accumulation can be performed after the display is nearly-zero or a
negative value.
A
A
A
A
f8 2
The scale accumulates the data, if the
F
key is pressed, when the
display is a stable value and without near-zero. The next
accumulation can be performed after the display is near-zero.
A
A
A
f8 3
When the display is a positive stable value, the scale accumulates
the data automatically. The next accumulation can be performed
after the display is near-zero or a negative value.
A
A
Function table Meaning and purpose
A
f8 4 When the display is a stable value, the scale accumulates the data
A