A&D HV-200KGL-WP, Instruction Manual

Page: 15 / 71

HVG-WP Series Page 13 6.1. Display and Symbols
Display and Symbols Meaning
A
Example. Storing the unit mass of the counting mode.
This is a display of zero point for the counting mode and
uses 20 pieces for the registration.
A
A
A
A
Example. Storing the unit mass of the counting mode.
The sign "-" means "weighing value is not zero".
Sample number is 10 pieces.
A
A
A
A
Example. Percentage mode.
This mode uses the registered 100% mass, and converts
the weighing value to a percentage. The unit is %
.
A
A
A
A
Example. Display of the function table.
This function table sets parameters of items.
＜
key Selecting an item.
∧
key Selecting the parameter of an item.
ENTER
key Storing new parameters.
A
A
A
A
A
Example. Preset tare. Entering tare with digital input.
＜
key Selecting a figure.
∧
key Selecting a number.
ENTER
key Storing a new tare.
A
A
A
A
Fixed value
Example. Hold display
The hold display is set using
f12
of the function table.
When the value is "nearly-zero" or changes more than
25% +30 digits, the hold is canceled.
A
A
A
A
Over load display.
Remove the mass from the weighing pan.
A
A
A
A
Weighing error.
Check the base unit and weighing pan.
A
A
A
A
Calibration error.
The calibration mass is too light.
Check the base unit and weighing pan.
A
A
A
A
Calibration error.
The calibration mass is too heavy.
Check the base unit and weighing pan.
A
A
A
A
The " nearly-zero " is within
± 4 digits from zero point in the unit of kg.