23
6. USING THE M+ MEMORY
6-1. The M+ Memory Function
The scale can accumulate count data by pressing the
M+
key, or automatically
(see the next page). It also keeps track of the number of times you add to the total.
When you view the total by pressing the
TOTAL
key, you view the number of
pieces accumulated and the number of additions (how many times the total was
added to). Please see “6-2.” and “6-3.” to view or clear the total count.
Adding Using the M+ Key
When stable count data is displayed:
1. Press the
M+
key.
The scale will beep and the
M+
indicator will
blink for a few seconds.
If the scale beeps 4 times, or the M+ indicator
did not blink, then refer to the note below.
The
M+
indicator will stay ON while there is count
in memory.
2. Press the
M+
key every time you want to add to the count. Remember that you
may only add the count data once – the scale must return to near zero before it will
let you add again.
To Erase the Last M+ Addition
1. Press and hold the
C
key, then press
the
M+
key – release.
2. The scale will beep and clear the last
M+
addition.
If the scale beeps 4 times, there is no
M+
addition to erase.
The
M+
key is accepted only once for each stable count data.
Once accepted, the
M+
key is disabled until the display returns
to less than +5d (1d = 1 weighing division).
If
f-03-02
is set at “
1
”, then the
M+
key can accumulate both
positive and negative data. Once the
M+
key is accepted,
weight data must return within ±5d before the next accumulation.
L
C
M+
+
M+
Ñ
beep
Ò
888.81
123
COUNT
TOTAL
M+
Summary of Contents for HC-30Ki
Page 1: ...Counting Scale HC 30Ki HC 15Ki HC 6Ki HC 3Ki WM PD4001164A...
Page 59: ...57 World map...
Page 60: ...58 MEMO...
