2
1. Introduction
Thank you for your A&D purchase! This is the instruction manual for the density determination kit.
The density determination kit can be easily used to measure the density of solid or liquid when it is combined
with the following electronic balances.
GX-124AE/GX-224AE/GX-324AE
GX-124A/GX-224A/GX-324A
GF-124A/GF-224A/GF-324A
Before using the density determination kit, please read this instruction manual thoroughly.
1-1. Precautions
This density determination kit allows the density or specific gravity of a solid or liquid to be measured. However,
the results of measurements may be affected by various factors that could cause errors, therefore we cannot
guarantee them to be 100 % accurate.
Do not use the density determination kit for measuring the density of chemically active substances.
After using the density determination kit, clean all surfaces to remove rust and oxides.
The balance is precision instrument, so avoid shocks or excessive loads.
To improve measuring accuracy, allow the temperature of liquid (water) and sample (solid) to equalize to the
ambient room temperature and perform measurement in a stable environment.
2. Unpacking The Kit
0.2
Float
Wire
Float hook
Thermometer clamp
Thermometer
Tweezers
Density pan
Density pan stand
Liquid container
Beaker stand
PMP
Beaker
Kit
box
Stores the kit after use.
