24
9.6.3.
AIS Function
AIS (Automatic Item Search) calls up a unit weight that is close to the current weighing value by searching
memory. With this function, items can be individually identified.
To use this function, the unit weight needs to be stored in advance.
The function is usable when the unit weight is heavier than near-zero (within ± 4d in kg).
Performing counting operations with inappropriate item data called up causes incorrect results. Make
sure that the data called up is that for the appropriate item.
1. Set function setting
to “ ” (refer to “
”).
2. Place nothing on the weighing pan.
If the scale does not display the weight as zero,
press the ZERO key to make it display zero.
3. Place one sample to count on the weighing pan.
4. The scale automatically searches and calls up a unit
weight that is close to the current unit weight. Check
the item code (IC) and unit weight. Press the
key, and the display of ID and item code is switched.
With internal memory, 10 data that are closer to the weighing value within approximately 5% from the
value become candidates.
With external memory, the data that is within approximately 5% from the weighing value becomes a
candidate.
5. You may begin counting operations using the unit weight called up.
If the data is not that which you are looking for, hold down the
C key and press the ID. key to display the next candidate.
The current weighing value
Item code
Unit weight
Hold down the
key
and press the
key
